We have HP 5950 Switch 1 and Switch 2 confiigured in Stack/IRF. They are connected to HP Synergy (virtual connector) at south bound interface. Bridge-aggregation 1 is configured between them. Total 6 interfaces are part of BA 1 (3 from Switch 1 and 3 from switch 2).
When we make hp 5950 sw-1 power off, everything works fine on hp 5950 sw-2 for around 12 - 13 minutes and then bridge-aagregations start to gets fluctuate due to below error.
%Sep 20 17:03:30:591 2019 LDPPPSW LAGG/6/LAGG_INACTIVE_PARTNER: Member port FGE1/2/3 of aggregation group BAGG1 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.
and it all works fine if we reset (shut/unshut) Bridge-aggregation 1.
Can somebody put some light on this and help me out here.
Thank you very much in advance !