Hi there,
Last year I did set up a wireless guest network as follows:
aruba 7005 port3 <=> HP 2910al Port1 <=> Port 1 <=> www
on aruba 7005 für port3: trunk-mode, ID:100
on 2910al:
Port DEFAULT_VLAN ID:1 GUEST-WLAN ID:100
---- + ------------ ------------
1 | Forbid Untagged (==> port with incoming traffic from Aruba 7005)
23 | Untagged Tagged (==> port to www)
This was working fine.
Now I had to replace that 2910al for 10GB-reasons with a H3C S5800 (= HP JC100B or = HP 5800-24)
There I set up the same:
Port DEFAULT_VLAN ID:1 GUEST-WLAN ID:100
---- + ------------ ------------
1 | Forbid Untagged PVID 100 (==>"trunk" port with incoming traffic from Aruba 7005)
23 | Untagged Tagged PVID 1 (==> "hybrid" port to www)
But I cannot get traffice through this connection.
Ist there something missing?