Dear All,
I have installed a HP 1920 Office Switch. We are using 3 VLAN's (2, 10 and 16). VLAN 10 is the Management VLAN. I connected Port GE1/0/1 to our other switch and configured that port tagged with VLAN 2,10 and 16 with Link Type "Trunk". The VLAN interface is set to VLAN ID 10 with the according IP address, which is the switch IP address. If I view the PORT DETAILS you see VLAN 1 untaged and VLAN 2,10,16 tagged with link type "TRUNK" and PVID 1. I can't ping to the switch. The switch itself works perfect, meaning that ports that are configured untaged to VLAN 2 or 16 are working and can communicate with each other.
Can you help me out with this "management VLAN" issue? I am not that good with networking, but the VLAN setup that we have is rather simple. Our other switch is a D-link switch. Which i configured the exact same way and I can connect to that switch without any issue.
Thank you in advance for your help.
Best regards,
Sam