intervlan routing on Procurve 1920

 

Hi  All,

 

 

 

I have created two network and want to isolate - however it it routing between networks.

 

Any advise?

 

Michael

 

 version 5.20.99, Release 1108

 sysname lon-sw-01

 dhcp relay server-group 1 ip 172.30.70.1
 dhcp relay server-group 2 ip 192.168.0.1

 domain default enable system

 ipv6

 telnet server enable

 password-recovery enable

vlan 1
 description default

vlan 10
 description guest wifi

domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable

traffic classifier class1 operator and

user-group system
 group-attribute allow-guest

local-user admin
 authorization-attribute level 3
 service-type lan-access
 service-type ssh telnet terminal
 service-type web

 stp mode rstp
 stp enable

interface NULL0

interface Vlan-interface1
 ip address 172.31.70.2 255.255.255.0
 dhcp select relay
 dhcp relay server-select 1

interface Vlan-interface10
 ipv6 address auto link-local
 ip address 192.168.0.2 255.255.255.0
 dhcp select relay
 dhcp relay server-select 2

interface GigabitEthernet1/0/1
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/2
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/3
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/4

interface GigabitEthernet1/0/5
 port link-type hybrid
 port hybrid vlan 10 tagged
 port hybrid vlan 1 untagged
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/6
 port access vlan 10
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/7
 port link-type hybrid
 port hybrid vlan 10 tagged
 port hybrid vlan 1 untagged
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/8
 port auto-power-down
 poe enable
 stp edged-port enable

interface GigabitEthernet1/0/9
 stp edged-port enable

interface GigabitEthernet1/0/10
 stp edged-port enable

 ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 172.31.70.1

 dhcp enable

 load xml-configuration

user-interface aux 0
 authentication-mode scheme
user-interface vty 0 15
 authentication-mode scheme

return