Basics:
- We have 2 old 192048G (A/B) switches.
- They are connectes via 5 * RJ45 and dynamic link aggregation.
- This is working just fine. I can ping/transfer from anywhere to anywhere on these two.
Problem:
- Now we have a 3. 48G Switch, but now it is a 1950 (C).
- We tried to configure everything like on the 2 1920, but it is not working.
- If just ping from switch A to C, B to C,... nothing is going through.
Config:
- A (5) <-> (5) B (5) <-> (5) C
- LinkAggregation (Bridged) Dynamic
- All defined ports (20) on all 3 switches are:
-- "Type" = trunk,
-- "PVID" = 1
-- "Permit VLAN List" = 100,200.
-- Untagged from VLAN 1
How can I see, like on the 2 1920, uder Network->LACP, the working or problems with LACP on the 1950? On the 1950 there is no LACP status site!? Or?
What do I miss? What can I try? Or maybe what is the best config?
Greetings
Bjoern
PS: If you need screens, or...just let me know....
PPS: This is more or less the howto we used for the 2 1920 -> https://www.youtube.com/watch?v=Y0d2XjKhlX4