Hi,
On the HPE 1820-24g I have the following connected ports:
1-12 PC and printers
21 - Connects to a Dlink dgs-1210-48(where another 30 pc are connected)
23 - Connects to a pfsense pc
Using only the default vlan(id=1) everything works with no problem.
In pfsense I've created a new vlan(id=30) and want to connect some pc on the hpe and dlink switch to his vlan.
On both switches I´ve created the vlan with id 30(vlan30).
On the hpe-1820-24g :
- on port 13 vlan30 as untagged and vlan1 as excluded(port vlan id = 30).
- on port 23 vlan30 as tagged, and vlan 1 as untagged(port vland id = 1)
- on port 21 vlan30, vlan1 as tagged(port vland id = none)
A pc connected to port 30 gets its correct vlan ip via dhcp from pfsense(port 23)
The pcs connected thru port 21 which are also vlan30 don´t get and IP address while pcs on vlan1 do. The port on the dlink which connects to the hpe also have vlan1 and vlan30 tagged.
This is the first time using vlans, am I missing some configuration on the HPE 1820-24g? Is there any way to know that the vlan30 tag from the dlink switch is coming through to the HPE switch?