Change mtu port in HP 1920-24g
Hi everyone!I have a problem to change the mtu of a 1920-24g switch port. My isp that gives me the link with mtu 2000, but I can't get traffic when I step through the switch.Jumbo frame indicates the...
View ArticleOC20 VLAN and multiple SSID
Hi, I would like to know if the OC20 APs support VLANs and how many SSIDs I can use with an AP.Thanks!
View ArticleOfficeConnect 1820 48G: get CPU and memory utilization from SNMP
Hi!I get statistics on interfaces by snmp. How do I get the snmp load of cpu and memory usage from snmp? Via the web this information is available
View ArticleHow to setup switch 1920S to have ip-mac binding?
I know 1920S can filter ip or mac by qos feature, but how to setup ip-mac binding on this device or co-work with other device?
View ArticleLogin ssh on switch 1910-24g / JG538A
Hi,How to login switch JG538a by ssh ?I have enabled the ssh service, then I tried to connect by ssh but I get this error: 'ssh_exchange_identification: Connection closed by remote host'.Thanks.
View ArticleDHCP relay to 2 failover DHCP ?
I understand that on our 1910-24G ( JE006a ), there can be only one 1 DHCP ip server for 1 group on dhcp relay page.If i configure 2 DHCP server for failover, can it be done with this switch ?
View ArticleHP 1920 POE+ and Aruba IAP-305 in powersave mode
Hi,we have some HP 1920 24g POE+ (370w) - JG926A with connected some Aruba IAP-305. Frequently but not always happens that the IAP-305 starts in powersave mode and it is necessary to reboot the AP or...
View ArticleSwitch advice for VoIP setup
As part of preparing our infrastructure to support a Panasonic VoIP system, we are upgrading several of our HP ProCurve switches. These are switches, which are almost 10 years old.Our core L3 switch is...
View ArticleHow to Enable Telnet and SSH on HPE 1920s OfficeConnect
Hi All I want to enable telnet and ssh on 1920s OfficeConnect How to do this ? Thanks.
View ArticleSoftware Update - HP 1820-8G J9979A
Hellocan anyone please point me to the procedure for updating the software for this model of switch using the web interface? Current Software Version is PT.01.10, latest version is PT.02.03 so well out...
View ArticleHP V1910 DHCP-Snooping broken?
I have quite a few V1910 Comware switches running the (second to) latest firmware, they all connect back to a "Core" A5500-24G-SFP switch. I have DHCP running on a Windows Server box connected to the...
View ArticleCannot configure Custom Certificate on HP Switch 1910
We tried to assign a custom certificate in our HPE 1910-8G-PoE+ (180W) Switch JG350A. Unfortunately we connot get it to work. The manual is not clear to us, so we hope can find the answer here. When...
View ArticleHPE OfficeConnect 1950-24G-2SFP+-2XGT - reboot / reload from CLI ?
I recently got a couple of HPE 1950's placed on my desk - traditionally I have worked from the CLI for switching products.I had not worked with these switches before, and I must say, they are quite...
View Articlereplacing a HP V1810-48G switch
I have a HP V1810-48G (J9660A) that went bad. I thankfully had a backup one that I just loaded the config on and I was off and running. I was looking for a replacement but I was wondering what the...
View ArticleOfficeconnect 20 - low speed
We have a performance problem wtih the OC20.. Our HP Elitebook X360 is working fast with a Linksys router EA6200 at +/- 200 mbps in AC 5Ghz mode. But is connecting, most of the time, with the OC20 at...
View ArticleHPE Officeconnect 1920s VLAN and trunk setup no CLI
I found this while looking for how to setup VLANS on a HPE 1920s. If this person posted this, or someone else please explain how this is down. I spent three hours yesterday in my test lab trying to...
View ArticleHow to get remote management to HPE 1920S switch?
Hi guys,I have an issue with a HPE 1920S switch and the remote management. The scenario is the following: in customer network management VLAN is 200, and right now I can access the switch locally...
View ArticleHPE 1950 - WebUI Certificate
We need to change the SSL-certificate on the Web UI to a certificate from our internal CA. How can this be achieved? Is there a way to generate a CSR file to send it to our CA to replace the...
View Articlerstp Problem on hpe 1920g and some comnet industrial switches
Hello,I am going a bit crazy over a network, i have 2 hp 1920g poe switches, between them about 9 comnet industrial switches on two lines forming a loop, so i need rstp to work to open loop and keep...
View Article