Hi,
I´m trying to put the DHCP Relay working on my Hp 1920 swich, my setup is just for test only for now, and i have a cheap Tp-Link router that as the DHCP server enable and its connected the swich with two Vlan configured and i´m tring to put the DHCP relay option to work on one have the Vlan.
>TP-Link router configuration:
IP Address: 192.168.1.250
subnet Mask:255.255.255.0
a static route configured:
Destination Network: 192.168.20.0 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.250
>DHCP server configuration:
Start IP Address: 192.168.1.100
End IP Address: 192.168.199
Default Gateway: 192.168.1.250
Primary DNS: 8.8.8.8 Secondary DNS: 8.8.4.4
>Swich 1920 Vlan configuration:
Vlan 10 - IP: 192.168.1.30 subnet Mask: 255.255.255.0
Vlan 20 - IP: 192.168.20.1 subnet Mask: 255.255.255.0
a static route configured:
Destination Network: 0.0.0.0 Mask: 0.0.0.0 Next Hop: 192.168.1.250
So im trying to configure the DHCP Relay option to work on Vlan20 (follow the configuration on the swich manual), but this dont work. I do not know if can be the tp-link router that do not work with this swich to this option...
Thanks for the help.