Clik here to view.
HPE 1920 IP address security for web management
I'm newbie with HP switches, so there may be some simple solution :-)network topology: I can ping from laptop all three HPE IP adresses (192.168.1.106, 192.168.11.10, 192.168.99.12) and tracert both...
View ArticleHP 1920 loopback problems on trunks between switches
I have a number of HP 1920 switches.The interconnects between the switches are configured with the following:loopback-detection enableloopback-detection control enableloopback-detection per-vlan...
View ArticleHP V1910-48G JE009A Factory reset - Password recovery capability enabled.
Hello Guys, I have got a HP V1910-48G JE009A on my desk without any credentials.This switch needs te be set to factory defaults. Steps I took so far; Connect switch cable to COMOpen Putty on COM 38400...
View ArticlePort Security | HP 1910 48G
Hi guys.I have a doubt about the port security feature over the HP 1910 48G device.I did the following commands in the CLI:GLOBAL CONFIG:port-security enableport-security trap intrusionINTERFACE...
View ArticleVoIP VLAN Issues V1910/2915-8
Hi All,I am having some issues getting our network to function correctly. I am sure I am missing something.We have installed a new VoIP system on VLAN5. I am using a 5406zlR2 as the core switch (no...
View ArticleSwitch HP V1910-24g
Hola, buenas tardes.Tengo un problema con un Switch HP V1910-24g, lo instalo una empresa independiente a nosotros, pero el detalle esque me bloquearon el acceso via web a ese Switch para administrarlo,...
View ArticleProCurve 1800-24G Switches causing Spanning Tree problems on Cisco Router
I have 3 ProCurve 1800-24G switches. Two of the switches are connected to the third using two aggregated links. The third switch is also connected to an HP ProLiant server using a teamed NIC (2 ports)....
View ArticleHP 1920 Prevent UP/DOWN logging
Is there a way of stopping the logging of interface up/down and associated messages?I currently have "info-center loghost n.n.n.n" and "snmp-agent target-host trap address udp-domain n.n.n.n params...
View ArticleDHCP scope not leasing to 1920 switches.
Hi,The switch i am using is 1920.Here the scenario is DHCP is server is created on a VMware. ESXI(10.67.0.0/16).i HAVE CREATED 2 SCOPES1. For Vlan 100(10.67.100.1-10.67.100.254) 2. For Vlan...
View ArticleIssues with sending email on a 1820 24G switch with VLAN enabled
Issues with sending email on a 1820 24G switch with VLAN enabledHelloMy office has just upgraded to the 1820 24G series switches. I have setup 5 different VLAN's. I have my servers and workstations on...
View ArticleHP 1910 Lan Auth with Radius
Hello, I’m having a hard time getting Lan authentication working. I currently have a radius server setup where I use it to authenticate VPN, wifi and port security. I cant seem to get it working with...
View ArticleEvent mapping alert template location in sitescope folder
New Alet > HP Operation Manager integration settings > Event Mapping > "Default alert event mapping".We can create and edit the templates here, However I need the location of these templates...
View ArticleHPE OfficeConnect 1920-48G Configuration
I have an HPE OfficeConnect 1920-48G switch I am trying to configure for vLAN. If I use an Edgemark on VLAN 99 untag the port and tag the primary data port what PVID is the Edgemark? I have not been...
View ArticleRADIUS authentication HP1920-16G
I currently have quite a few HP1910 (8G and 16G) and HP 5120 which use RADIUS for SSH logins. The NPS server is 2012R2. The RADIUS authentication works and assigns the correct privilege level.Recently...
View Articleconfigurando de link agregation no V1920 24G
Olá a todos, embora já use produtos da HP a alguns anos, sou novo por aqui. Gostaria de pedir a ajuda dos colegas para configurar um link agregation em dois V1920 24G que tenho, já fiz a configuração...
View ArticleVLANS IN V1920
Hello everyone.I wonder how could create the following environment: Router - Switches A, B , C - VLAN01 , VLAN02 , VLAN03 . Where VLAN01 can communicate with all printers, VLAN02 only with printer B...
View ArticleSwitch - compatibility question
Hi!I have 2 HP 1810 (J9803A) switches. Those two are connected via optical cabels. Now as we are expanding I want to buy HP 1920(JG927A). My question: Can those two models be connected with optical...
View Articlestp loop-protection (HP 1920)
Can anyone tell me what the purpose of the "stp loop-protection" command is, and whether it should be enabled on inter-switch links and BAGG interfaces?Thanks
View ArticleUsing SFP+ Uplink Port of HPE FlexNetwork 5130 24G SFP 4SFP+ EI Switch (JG933A)
Hello,Can i used SFP+ Uplink port of HPE 5130 Switch to connected to HP StoreVirtual using 10GbE iSCSI? Is it recommended?Thank you.
View Article