Hello everyone,
Apologies for the very basic question but haven't found an answer in the user manual or in other topics in this forum.
I am simply wondering if the 10gbase-t ports are supposed to be used for stacking only or if I can use them as normal ports as well (and thus connect to anything like a NAS or computer, in case my question wasn't stupid enough :) )
Many thanks to anyone willing to take the 30 seconds to answer this
JP
Hi
Someone can explain to me how can I connect to HP switch 1920 website ?
I tried http://192.168.1.1 but it's orange website
Thanks for your help
Please advise on below inquiries,
1. Please state the difference between V1920-48G and V1920s-48G about their shape and the function
2. V1920-48G is no longer in production? Any stock left to pruchase?
I hope someone can help,
We have 5 x HP 1820 switches connected via Trunk on each using the SFPs, Recenetly we put a HP 1920 in front of a 1820 due to needing more connectivity, However this 1920 will not connect to our Dell N2048 using dual SFP on a trunk, as soon as its connected (Both SFPs) the network storms and crashes.
I Do have the 1820 sat behind the 1920 using Trunks on Ports 51 and 52 and that does allow communications.
I need ports 49, 50 to be a Tunk to our Dell with VLANs 1, 10, 20, 30 which is currently setup for ports 49 - 52.
Can Anyone help?
On our V1910 switch we have observed intermittent network disconnections.
Based on the log file, the ports with the highest number of network disconnections (indicated with "link status is DOWN") were 4 ports (Ports 9, 30, 31, 32) that are members of a static aggregation group identified as BAGG9.
In the logfile, the following message is recorded for Port 9 (Similar messages appear for ports 30,31,32):
"Port member GigabitEthernet1/0/9 of aggregation group BAGG9 becomes INACTIVE, because the port's configuration is improper for aggregation."
We have checked our configuration and found that the 4 ports have the following settings:
•802.1X protocol is disabled
•Handshake is enabled
•Periodic reauthentication is disabled
•The port is an authenticator
•Authentication Mode is Auto
•Port Control Type is Mac-based
•802.1X Multicast-trigger is enabled
•Mandatory authentication domain: NOT configured
•Guest VLAN: NOT configured
•Auth-Fail VLAN: NOT configured
•Max number of on-line users is 256
Which of these settings is "improper for aggregation"?
Hi All,
i have recently bought and deployed 3x JG963A-OC20- HPE 1950 48G 2SFP+ 2XGT POE+ SWITCH 'S
and the primary switch in the stack ( first switch configured and deployed. also has the most occupied ports) is not responding properly.
when i enter the ip address in a webbrowser (used opera,chrome,Internet explorer. across multiple machines)
the web UI comes up blank or with a password reset screen in plain text.
Any help on how to fix this issue would be much appreciated.
Dear good afternoon, Request your support today, change and restart unexpectedly the following message, I need your support to prevent the case.
***************************************************
* Start FASTPATH Stack Information *
***************************************************
pid: 1129
TID: 0xb67204c0
Task Name: bcmINTR
si_signo: 11
si_errno: 0
si_code: 1
si_addr: (nil)
Date/Time: 5/2/1970 7:59:47
SW ver: PD.01.05
------------ CALL STACK INFO ------------
$001b9804$ log_error_code + 0x60
$0006bcdc$ hapiBroadAssert + 0x14
$00e8f778$ sal_assert_set + 0x30
$00ffccec$ soc_dma_done_chain + 0x224
$0101a194$ soc_cmicm_intr + 0x200
$00e8bb1c$ bcm_hr2_dual_port_mode_reinit + 0x748
$00640c40$ osapi_task_wrapper + 0x168
/lib/libpthread.so.0 [0xb6f717e8]
-----------------------------------------
Stack Size: 20480 Bytes
Stack Base Address: 0xB671C000
***************************************************
* End FASTPATH Stack Information *
***************************************************
Hi all,
we cannot login to multiple HP 1820-24G Switch J9980A. On the Webinterface there is an error in the console:
VM35:3 Uncaught SyntaxError: Unexpected token <
at HTMLDocument.loginFailed (login.lsp:159)
at HTMLDocument.dispatch (jquery-1.7.1.min.js:3)
at HTMLDocument.i (jquery-1.7.1.min.js:3)
at Object.trigger (jquery-1.7.1.min.js:3)
at Object.trigger (jquery-1.7.1.min.js:3)
at w (jquery-1.7.1.min.js:4)
at XMLHttpRequest.d (jquery-1.7.1.min.js:4)
Tested with Chrome, Firefox, IE, IE compatibility mode. What can we do?
Cheers,
Elias
Hi,
Can anyone help me regarding my query about compatibility of HPE 1G SFP LC MODULE SX to any other Switch like ARUBA, D-Link and 3COM Super Stack Switches. Am I going to have any issues if I'm going to use this SFP Module to those said Brands of Switches assuming these switches has 1G SFP Module Port as well.
Many thanks!
Hi,
I tried to reboot my switch, but it's display on my screen loop booting system. I try typing Ctrl+B or Ctrl+D to access bootware menu to upgrade firmware but I can't.
rtk_drv_statistics.c, line = 156
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 156
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 546
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 239
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 294
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 770
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 779
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 267
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 267
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 546
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 124
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 189
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 691
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 700
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 156
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 156
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 546
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 239
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 294
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 770
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 779
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 267
RTK API error = 3, file hal/switch/realtek/rtk_drv_statistics.c, line = 267
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
RTK API error = 3, file hal/switch/realtek/rtk_drv_port.c, line = 1702
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...................Done!
****************************************************************************
* *
* HP 1920-24G Switch JG924A BootWare, Version 1.15 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.
Compiled Date : Apr 8 2015 17:47:41
CPU Type : MIPS4kec
CPU L1 Cache : 16KB
CPU Clock Speed : 500MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Memory Speed : 300MHz
BootWare Size : 3MB
Flash Size : 32MBBootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/JG924A-CMW520-R1107.bin!..
...................................
Please help !
I have an HP 1920-8G (JG920A) that will only boot to the Bootware menu. The config file will not load; both it and the backup are corrupted, it seems. The only way I can connect is using a serial connection to the cosole port. I'd like to restore to factory default, but it says "Password recovery capability is enabled. To perform this operation, first
disable the password recovery capability using the undo password-recovery enable command in CLI."
Unfortunately, I can't do that. Is there another way?
I have updated firmware to apply but any time I try to do that via the Serial SubMenu, the XModem transfer errors out.
At this point I'm simply replacing the switch, but I need to know if the 1920 is effectively bricked or if there is a way to bring it back to life. Thanks!
Hi Friends, Is it possible for a router to get infected? I am getting an update from Avast saying the router is infected. What might be the case?
Hi,
How can we detect Rogue Switch or Un-Managed switch being connected. In this case someone has connected Rogue Switch in his place and network admin is not aware, so network admin can catch such incidents.
Please advise
Regards,
Manish Chawda
hello I have several hp switches:
5500
5130
2530
1900
I would like to know the serial number from the cli.
is it possible?
Hi, I wanted to limit the bandwidth in a 1920-48g swicht in a port, but when applying the policy I get an error, it indicates Setting GigabitEthernet1 / 0/5 - Not support match any.
The configuration I set was GTS Enable, Match Type Any Queue No Change, CIR 400.
Thank you
I have an HP 1920-8G (JG920A) that recently lost its mind; it only boots to the Extend-Bootware Menu, after saying that the config file is no good. I tried using XModem to push a recent version of the OS (1920-8G-JG920A_5.20.R1121) to the device, which seemed to work until the next reboot, at which point it wouldn't boot up again and went to the EBM. I need to know if the switch is formally borked or if I'm simply missing a step, or need to load and older OS to the device. Thanks!
I have 8 no's of JL382A switches and want them in a stacking with single management, in datasheet i couldn't find any option for stacking, whether it is possible in this model, pls suggest me
Hi all,
Is there any way to activate dhcp snooping on HPE OfficeConnect Switch 1920S 24G 2SFP PoE+ (370W) JL385A?? is there any alternative to it?
I've been trying to implement it on web or cli with no avail?
Thanks a lot!
