Where to get newer Firmware for ProCurve 1800-24G?
Hi, I got a "new" old switch with a pretty old firmware-version (PB.02.03). Now I want to upgrad to the last firmware-version for my switch (PB.03.04).Where can I find the latest firmware?I didn´t find...
View Article1910-8G Switch JG348A vlan/routing setup
I have a JG348A with software 1513P99 and I could use come assistance on getting the configuration right.I need to pass two vlans over the uplink port from a primary switch, 102 and 113. Vlan 102 is...
View ArticleBest way to connect 2 HP Procurve Switch.
Hi. I have a network with 78 end stations + 2 servers, I want to use 2 HP ProCurve 1920. What is the best way to connect both switches in the same rack and give me the best performace with cooper?...
View ArticleProcurve 1920 SNMP Timeout
Hi, We have a new fleet of HP Procuve 1920 that we are replacing our netgears with. We have come across an odd issue that only affects the HP's. Every 6-7hrs we loose SNMP connectivity (we get an SNMP...
View ArticleLoop Protection on 1920 jg925a
Hi I've some 1920-24g-Poe+ (jg925a) with fiber uplink.I want to enable the loop guard to prevent the network from loop.I've the MSTP configured by default (enable), in network->mstp->port setup...
View ArticleSFP module on HP 1910-8G
Hello,I got HP 1910-8G switch and SFP module. When I insert SFP module console gives these lines and no communication runs thru fiber: %Apr 26 14:54:59:226 2000 APPANSW00...
View ArticleHP 1920 moving ports to VLANS
Hello I just have my hands on HP 1920 we managed switch. Prior to that never had used web as managing switches, always been using CLI. I take session through switch IPI create VLANS on 1920.Move all...
View Article1920 configure port security
Hello Got 1920 34G switch as a demo usint to work on and test it. previously have worked on CLI mode og HP 2520, 3COM etc. not fluent with web interface.We use port security. Below is the config...
View Article2928-SF Plus (V1910-24G) error modifying default IP
Hello there I'm having a big problem with my 3Com Baseline Switch 2928-SFP Plus. I'm confyguring the switch to my fiber optic cable network and as I do to all my new switch i need to change the default...
View ArticleProblem configuring LACP on 1910 switch
We have 6 HP 1910 switches that all connect back to a Meraki MS320 switch, and we've been attempting to configure LACP between the HPs to the Meraki. The Meraki has an embedded packet capture, and we...
View ArticleError : This scheme is referenced in a Domain
Hello HP switch 1920want to remove RADIUS servers (that are defined), getting this errorThis scheme is referenced in a Domain I want to remove the defined RADIUS and create new again. Because facing...
View ArticleHP V1920 PoE (370W) - Weird Issues
Good afternoon everyone, I'm new to the deeper side of networking as I've never had the opportunity before to delve into the dark side of networking, so please bear this in mind...I look after our...
View Articlevlan problem 1810
Hello,I have managed switch HP's sample -1810 (1810-8g j9802a)i want to create 1 vlan.one for test.i configure port number 4 for vlan test.what happed if i contect some pc to this port ? what ip...
View Article"Login Failed" on telnet / console 1920 switch
Hi Need some help I configured MAC based 802.1X on 1920 switch, alsong with RADIUS, AAA. Problem is that after closing the browser window, I am unable to login through the web not even through the...
View ArticleHP V1810-48G VLAN Name Default ändern
Hallo, ich möchte an einem HP V1810-48G den VLAN Name Default ändern, die Optionen Set Name und Delete Name sind inaktiv. Gibt es (k)eine verborgene Möglichkeit an der GUI oder eine an der Console?...
View ArticleHP 1820-24G Switch J9980A - No gigabit ports
Hi, im hoping im doing something stupid here. I have two new 1820-24G switches but all ports only come up as 100Mbps when plugging in laptop with a gigabit port. When I look in port configuration there...
View ArticleHP 1910 24G and VLAN confusion..need a little help please
Hello and thank you in advance for the help. My 1910 switch has the default VLAN 0001 in which I have my inter office network on (Server and Workstations). I obviously want to keep this network to...
View ArticleHP v1910 and 2620 - Setting up VLAN between switches with link aggregation
[switch 1 HP v1910] ====lag vlan trunk========[switch 2HP 2620]|| |||| ===lag vlan trunk========[switch 3 HP 2620]||||===lag vlan trunk========[switch 4 HP 2620]can someone help with configuration onHP...
View ArticleCombine 2 units of HP 1920 or 1950 switch as single logical switch
Hi, In HP 1920/1950 switch brochure, it shows it can stack up to 4 units. I'd like to know it can be combined to form a single logical switch with at least 2 units or not. I'd like to provide high...
View Article